LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Meter, Warning Lamp & Indicator -Diagnostic Trouble Codes (DTC U1000 -B2268) Q50_Hybrid) >> DTC/Circuit Diagnosis >> Washer Level Switch Signal Circuit >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK WASHER LEVEL SWITCH

    1. Turn ignition switch OFF.
    2. Disconnect washer level switch connector.
    3. Check washer level switch.
      Terminals Condition Continuity
      Washer level switch
      1 2 Washer level switch: ON Existed
      Washer level switch: OFF Not existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace washer level switch. Refer to REMOVAL AND INSTALLATION .