LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2017 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Meter, Warning Lamp & Indicator -Diagnostic Trouble Codes (DTC U1000 -B2268) Q50_Hybrid) >> DTC/Circuit Diagnosis >> Steering Switch Signal B Circuit >> Component Inspection

Component Inspection

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK STEERING SWITCH

    1. Remove steering switch. Refer to REMOVAL AND INSTALLATION .
    2. Measure the resistance between the steering switch connector.
      Steering switch Condition Resistance
      (Approx.) Ω
      Terminal Terminal
      14 17 BACK switch ON 1
      MENU UP switch ON 119 - 123
      MENU DOWN switch ON 315 - 327
      Voice recognition switch ON 709 - 737
      MENU OK switch ON 1983 - 2063
      15 VOL DOWN switch ON 1
      VOL UP switch ON 119 - 123
      TEL switch ON 315 - 327
      Display next switch (RTRIF ) ON 709 - 737
      Display back switch (LTRIF ) ON 1983 - 2063
      G09161387Courtesy of NISSAN NORTH AMERICA, INC.

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace steering switch. Refer to REMOVAL AND INSTALLATION .