DTC Confirmation Procedure
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
- Turn ignition switch ON and wait for 60 seconds or more.
- Check "Self Diagnostic Result" of "METER/M&A."
Is "WATER TEMP" displayed?
YES
Refer to TROUBLE DIAGNOSIS FLOW CHART .
NO-1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO-2
Confirmation after repair: INSPECTION END