Component Inspection

1. Turn ignition switch OFF.
2. Disconnect malfunctioning door switch connector.
3. Check continuity between door switch terminals.

   Door switch			Condition		Continuity
   Terminal
   Driver side	3	Ground part of door switch	Door switch	Pressed	Not existed
   				Released	Existed
   Passenger side				Pressed	Not existed
   				Released	Existed
   Rear LH				Pressed	Not existed
   				Released	Existed
   Rear RH				Pressed	Not existed
   				Released	Existed

Is the inspection result normal?

YES 

INSPECTION END

NO 

Replace malfunction door switch.