Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect combination meter connector and parking brake switch connector.
3. Check continuity between combination meter harness connector and parking brake switch harness connector.

   Terminals				Continuity
   Combination meter		Parking brake switch
   Connector	Terminal	Connector	Terminal
   M57	26	E60	1	Existed

4. Check continuity between combination meter harness connector and ground.

   Terminals			Continuity
   Combination meter		Ground
   Connector	Terminal
   M57	26		Not existed

Is the inspection result normal?

YES 

Refer to COMPONENT INSPECTION .

NO 

Repair harness or connector.