| Trip reset and illumination control switch |
Trip reset switch (1) |
Press |
- The trip meter can be switched between A and B.
- Trip meter A/B can be reset by pressing and holding the trip reset switch.
|
| Illumination control switch (+) (2) |
An illuminance level of the back light of the combination meter can be adjusted. |
| Illumination control switch (-) (3) |
| Trip computer switch |
Enter switch (4) |
- The information display screen can be switched.
- The item indicated on the information display can be confirmed.
- An indicated value of the trip computer can be reset by pressing and holding the enter switch.
|
| Select switch (5) |
When plural items are shown on the information display, a selected item can be changed to the other item. |