| BCM |
Controls the door lock system |
| IPDM E/R |
Sounds horn via CAN communication between BCM |
| Air bag diagnosis sensor unit |
|
| Combination meter |
- Displays each operation method guide and warning for system malfunction
- Performs operation method guide and warning with buzzer
- Transmits vehicle speed signal to CAN communication line
|
| TCM |
Transmits shift position signal to BCM via CAN communication line |
| Remote keyless entry receiver |
Receives Intelligent Key operation and transmits to BCM |
| Inside key antenna |
Detects if Intelligent Key is inside the vehicle |
| Outside key antenna |
Detects if Intelligent Key is outside the vehicle |
| Push-button ignition switch |
Inputs push-button ignition switch ON/OFF condition to BCM |
| Door switch |
Inputs door open/close condition to BCM |
| Door lock and unlock switch |
- Detects if door lock and unlock switch is press/release
- Integrated in the power window main switch and front power window switch (passenger side)
|
| Door request switch |
- Detects if each door request switch is press/release
- Integrated in the outside handle (driver side, passenger side) and back door opener switch assembly
|
| Intelligent Key warning buzzer |
Warns the user of the lock/unlock condition and inappropriate operations with the buzzer sound |
| Intelligent Key |
The following functions are available when having and carrying electronic ID
- Door lock/unlock
- Engine start
- Remote control entry function is available when operating on button
|
| Hazard warning lamp |
Warns the user of the lock/unlock condition and inappropriate operations with the lamps blink |
| Door lock actuator |
Output lock/unlock signal from BCM and locks/unlocks each door |
| Fuel lid lock actuator |
Output lock/unlock signal from BCM and locks/unlocks fuel filler lid |