LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> QX70 RWD >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Door & Lock (With Intelligent Key System) (Circuit Diagnosis, Symptom Diagnosis & Removal And Installation) >> Removal And Installation >> Hood Lock >> Inspection

Hood Lock: Inspection

NOTE:

If the hood lock cable is bent or deformed, replace it.

  1. Check that secondary latch is properly engaged with secondary striker [6.8 mm (0.268 in)] by hood weight.
  2. While operating hood opener, carefully check that the front end of hood is raised by approximately 20 mm (0.787 in). Also check that hood opener returns to the original position.
  3. Check that hood opener operating is condition 49 N (5.0 kg, 11.0 lb) or less.
  4. Install so that static closing force of hood is 94 - 490 N (9.6 - 50.0 kg, 21.1 - 110 lb).
    NOTE:
    • Exert vertical force on right side and left side of hood lock.
    • Do not simultaneously press both sides.
  5. Check the hood lock lubrication condition. If necessary, apply body grease to hood lock.
scientia non olet · About LEMON Manuals