LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> QX70 RWD >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Door & Lock (With Intelligent Key System) (Circuit Diagnosis, Symptom Diagnosis & Removal And Installation) >> Removal And Installation >> Front Fender >> Disassembly And Assembly

Disassembly And Assembly

  1. Remove fender protector (front). Refer to REMOVAL AND INSTALLATION .
  2. Disengage pawls of front fender duct (1) assembly from front fender (2) to remove.
    GNSJMKIA2637ZZ-637Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:

    When removing front fender duct assembly, peel off the double-faced adhesive tape at a time, and carefully to remove it.

    SANKAKU-H : Pawl
scientia non olet · About LEMON Manuals