LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> QX70 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Front Suspension (2WD) (VR30DDTT) (Except Hybrid)) >> Service Data And Specifications (SDS) >> Service Data And Specifications (SDS) >> Wheel Arch Height

Wheel Arch Height

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
Item Standard
Front (Hf) 708 mm (27.87 in)
Rear (Hr) 696 mm (27.40 in)
G04076540Courtesy of NISSAN NORTH AMERICA, INC.

Measure value under unladen * conditions

*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.