LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> QX70 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (Automatic Drive Positioner (DTC/Circuit Diagnosis) (Hybrid)) >> DTC / Circuit Diagnosis >> Sliding Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUNCTION

    1. Select "SLIDE SW-FR", "SLIDE SW-RR" in "Data monitor" mode with CONSULT.
    2. Check sliding switch signal under the following conditions.
    Monitor item Condition Status
    SLIDE SW-FR Sliding switch (forward) Operate ON
    Release OFF
    SLIDE SW-RR Sliding switch (backward) Operate ON
    Release OFF

    Is the indication normal?

    YES 

    INSPECTION END

    NO 

    Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals