Component Function Check

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

CHECK FUNCTION

Select "LIFT RR SW-UP", "LIFT RR SW-DN" in "Data monitor" mode with CONSULT.

Check lifting switch (rear) signal under the following conditions.

Monitor item	Condition		Status
LIFT RR SW-UP	Lifting switch rear (up)	Operate	ON
LIFT RR SW-UP	Lifting switch rear (up)	Release	OFF
LIFT RR SW-DN	Lifting switch rear (down)	Operate	ON
LIFT RR SW-DN	Lifting switch rear (down)	Release	OFF

Is the indication normal?

YES

INSPECTION END

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .