Diagnosis Procedure
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK TRUNK LID OPEN SIGNAL CIRCUIT
- Connect the CONSULT.
- Check the BCM input signals. Refer to COMPONENT FUNCTION CHECK .
Is the inspection result normal?
YES
GO TO STEP 2.
NO
Repair or replace malfunctioning parts.
- CHECK COMBINATION METER INPUT SIGNAL
Select the "Data Monitor" for the "METER/M&A" and check the "TRUNK/GLAS - H" monitor value.
"TRUNK/GLAS - H" Trunk lid open : On Trunk lid closed : Off Is the inspection result normal?
YES
Replace combination meter. Refer to REMOVAL AND INSTALLATION .
NO
Replace BCM. Refer to REMOVAL AND INSTALLATION .