Disassembly And Assembly: Disassembly
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the finisher.
- Disengage the pawls (3 on the lower part) of the combination meter.
- Insert the removal tool into the clearance (in the order of
,
,
) between the front cover and the meter control unit. Remove 4 pawls on the upper part and 2 pawls on the sides of the front cover by turning the tool while increasing the clearance.
CAUTION:Wrap the removal tools with protective tape to prevent scratches.
- Pull the front cover straight to remove it from the unified meter control unit.CAUTION:
- Never touch the display, pointer, the inside of front cover and the printed area of the dial during the work.
- Keep away from magnetic sources.
- Never damage the front cover.