System Description: System: Fail-Safe
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
The fail-safe mode may be activated if the following symptoms are observed.
| Operating in fail-safe mode |
Malfunction Item | Related DTC | Diagnosis |
|---|---|---|---|
| Only manual functions operate normally. | CAN communication | U1000 | DTC DESCRIPTION |
| CONTROL UNIT | U1010 | DTC DESCRIPTION | |
| EEPROM | B2130 | DTC DESCRIPTION | |
| Only manual functions, except door mirror, operate normally. | UART communication | B2128 | DTC DESCRIPTION |
| Only manual functions, except seat sliding, operate normally. | Seat sliding output | B2112 | DTC DESCRIPTION |
| Only manual functions, except seat reclining, operate normally. | Seat reclining output | B2113 | DTC DESCRIPTION |
| Only manual functions, except steering tilt, operate normally. | Steering column tilt output | B2116 | DTC DESCRIPTION |