Data Monitor
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.
| Monitor Item | Unit | Main Signals |
Selection From Menu | Contents |
|---|---|---|---|---|
| SETSW | "On/Off" | * | * | ON/OFF status judged from the setting switch signal. |
| MEMORYSW 1 | "On/Off" | * | * | ON/OFF status judged from the seat memory switch 1 signal. |
| MEMORYSW 2 | "On/Off" | * | * | ON/OFF status judged from the seat memory switch 2 signal. |
| SLIDESW-FR | "On/Off" | * | * | ON/OFF status judged from the sliding switch (forward) signal. |
| SLIDESW-RR | "On/Off" | * | * | ON/OFF status judged from the sliding switch (backward) signal. |
| RECLNSW-FR | "On/Off" | * | * | ON/OFF status judged from the reclining switch (forward) signal. |
| RECLNSW-RR | "On/Off" | * | * | ON/OFF status judged from the reclining switch (backward) signal. |
| LIFTFRSW-UP | "On/Off" | * | * | ON/OFF status judged from the lifting switch front (up) signal. |
| LIFTFRSW-DN | "On/Off" | * | * | ON/OFF status judged from the lifting switch front (down) signal. |
| LIFTRRSW-UP | "On/Off" | * | * | ON/OFF status judged from the lifting switch rear (up) signal. |
| LIFTRRSW-DN | "On/Off" | * | * | ON/OFF status judged from the lifting switch rear (down) signal. |
| MIRCONSW-UP | "On/Off" | * | * | ON/OFF status judged from the mirror switch (up) signal. |
| MIRCONSW-DN | "On/Off" | * | * | ON/OFF status judged from the mirror switch (down) signal. |
| MIRCONSW-RH | "On/Off" | * | * | ON/OFF status judged from the door mirror remote control switch (passenger side) signal. |
| MIRCONSW-LH | "On/Off" | * | * | ON/OFF status judged from the door mirror remote control switch (driver side) signal. |
| MIRCHNGSW-R | "On/Off" | * | * | ON/OFF status judged from the door mirror remote control switch (switching to right) signal. |
| MIRCHNGSW-L | "On/Off" | * | * | ON/OFF status judged from the door mirror remote control switch (switching to left) signal. |
| TILT SW-UP | "On/Off" | * | * | ON/OFF status judged from the tilt switch (up) signal. |
| TILT SW-DOWN | "On/Off" | * | * | ON/OFF status judged from the tilt switch (down) signal. |
| TELESCO SW-FR | "On/Off" | * | * | ON/OFF status judged from the telescoping switch (forward) signal. |
| TELESCO SW-RR | "On/Off" | * | * | ON/OFF status judged from the telescoping switch (backward) signal. |
| DETENTSW | "On/Off" | * | * | The selector lever position "OFF (P position) / ON (other than P position) " judged from the detention switch signal. |
| STARTERSW | "On/Off" | * | * | Ignition key switch ON (START, ON) /OFF (ACC, OFF) status judged from the ignition switch signal. |
| SLIDE PULSE | - | - | * | Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases. |
| RECLN PULSE | - | - | * | Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases. |
| LIFT FR PULSE | - | - | * | Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases. |
| LIFT RR PULSE | - | - | * | Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases. |
| MIR/SENRHU-D | "V" | - | * | Voltage input from door mirror sensor (passenger side) up/down is displayed. |
| MIR/SENRHR-L | "V" | - | * | Voltage input from door mirror sensor (passenger side) left/right is displayed. |
| MIR/SENLHU-D | "V" | - | * | Voltage input from door mirror sensor (driver side) up/down is displayed. |
| MIR/SENLHR-L | "V" | - | * | Voltage input from door mirror sensor (driver side) left/right is displayed. |
| TILT PULSE | - | - | * | Value (32768) when battery connections are standard. If it moves DOWN, the value increases. If it moves UP, the value decreases. |
| TELESCO PULSE | - | - | * | Value (32768) when battery connections are standard. If it moves backward, the value increases. If it moves forward, the value decreases. |
| VEHICLE SPEED | - | * | * | Display the vehicle speed signal received from combination meter by numerical value [km/h]. |
| P RANG SW CAN | "On/Off" | * | * | ON/OFF status judged from the P range switch signal. |
| R RANGE (CAN) | "On/Off" | * | * | ON/OFF status judged from the R range switch signal. |
| DOORSW-FL | "On/Off" | * | * | ON/OFF status judged from the door switch (front driver side) signal. |
| DOORSW-FR | "On/Off" | * | * | ON/OFF status judged from the door switch (front passenger side) signal. |
| IGN ON SW | "On/Off" | * | * | ON/OFF status judged from the ignition switch signal. |
| ACC ON SW | "On/Off" | * | * | ON/OFF status judged from the ACC switch signal. |
| KEY ON SW | "On/Off" | * | * | ON/OFF status judged from the key on switch signal. |
| KEYLESS ID | - | * | * | Key ID status judged from the key ID signal. |
| KYLS DR UNLK | "On/Off" | * | * | ON/OFF status judged from the driver side door unlock actuator output switch signal. |
| VHCL SPEED (ABS) | "On/Off" | * | * | ON/OFF status judged from vehicle speed signal. |
| HANDLE | "LHD" | * | * | RHD/LHD status judged from handle position signal. |
| TRANSMISSION | "AT/MT" | * | * | AT/MT status judged from transmission. |
| STEERING STATUS | "LOCK/UNLOCK" | * | * | LOCK/UNLOCK status judged from steering lock unit. |
| INITIAL STATE | "DONE/YET" | * | * | Displays the default status of the log-in function. |
| USER1 REGIST | "DONE/YET" | * | * | Displays the USER1 registration or non-registration status of the log-in function. |
| USER2 REGIST | "DONE/YET" | * | * | Displays the USER2 registration or non-registration status of the log-in function. |
| USER3 REGIST | "DONE/YET" | * | * | Displays the USER3 registration or non-registration status of the log-in function. |
| USER4 REGIST | "DONE/YET" | * | * | Displays the USER4 registration or non-registration status of the log-in function. |
| LOGIN USER | "USER1/USER2/USER3/USER4" | * | * | Displays the current log-in user with the log-in function. |
| USER1 SW | "On/Off" | * | * | ON/OFF status judged from user1 change switch signal. |
| USER2 SW | "On/Off" | * | * | ON/OFF status judged from user2 change switch signal. |
| USER3 SW | "On/Off" | * | * | ON/OFF status judged from user3 change switch signal. |
| USER4 SW | "On/Off" | * | * | ON/OFF status judged from user4 change switch signal. |
| LOGIN USER CHANGE | "PRBT/PRMT" | * | * | Display the user change permission or inhibition status of the log-in function. |
| KEY LINK FUNCTION | "On/Off" | * | * | Displays the ON/OFF status of the Intelligent Key interlock function. |
| KEY NUMBER | "KEY 1/KEY 2/KEY 3/KEY 4" | - | - |
NOTE:
This item is displayed, but cannot be monitored |
| KEY 1 | "NO REG/ACT/INACT" | - | - |
NOTE:
This item is displayed, but cannot be monitored |
| KEY 2 | "NO REG/ACT/INACT" | - | - |
NOTE:
This item is displayed, but cannot be monitored |
| KEY 3 | "NO REG/ACT/INACT" | - | - |
NOTE:
This item is displayed, but cannot be monitored |
| KEY 4 | "NO REG/ACT/INACT" | - | - |
NOTE:
This item is displayed, but cannot be monitored |
| Log-in user setting 1 | "Off/User1/User2/User3/User4" | * | * | The user number that is used for transmitting the settings of the log-in function is displayed. |
| Log-in user setting 2 | "Off/User1/User2/User3/User4" | * | * | The user number that is used for receiving the settings of the log-in function is displayed. |
| Log-in user setting copy status | "On/Off" | * | * | The copy status of the Log-in function is displayed with "On/Off". |