Normal Operating Condition: Description
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
The following symptoms are normal operations, and they do not indicate a malfunction.
| Symptom | Cause | Action to take | Reference |
|---|---|---|---|
| Entry/exit assist function and seat synchronization do not operate. | No initialization has been performed. | Perform initialization. | DESCRIPTION |
| Entry/exit assist function is disabled.
NOTE:
The entry/exit assist function and seat synchronization function are disabled before delivery (initial setting). |
Change the settings. | DESCRIPTION | |
| Telescopic does not operate by entry/exit assist function. | Telescopic is not interlocked with entry/exit assist function. | - | Exit assist function: SYSTEM DESCRIPTION |
| Entry assist function: SYSTEM DESCRIPTION |
|||
| Entry assist function does not operate. | Manual operation with power seat switch was performed after exit assist function execution. | Perform the memory function. | SYSTEM DESCRIPTION |
| Lumbar support do not perform memory operation. | The lumbar support system is controlled independently with no link to the automatic drive positioner system. | - | Lumbar support system: SYSTEM DESCRIPTION |
| Memory function, log-in function, entry/exit assist function function, or Intelligent Key interlock function does not operate. | The operating conditions are not fulfilled. | Fulfill the operation conditions. | Memory function: SYSTEM DESCRIPTION |
| Log-in function: SYSTEM DESCRIPTION | |||
| Exit assist function: SYSTEM DESCRIPTION |
|||
| Entry assist function: SYSTEM DESCRIPTION |
|||
| Intelligent Key interlock function: SYSTEM DESCRIPTION |