LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> QX70 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Automatic Drive Positioner (Symptom Diagnosis & Removal And Installation) (Hybrid)) >> Symptom Diagnosis >> Manual Function Does Not Operate >> Tilt & Telescopic >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK TILT & TELESCOPIC SWITCH GROUND CIRCUIT

    Check tilt & telescopic switch ground circuit.

    Refer to DIAGNOSIS PROCEDURE .

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Repair or replace harness or connector.

  2. CONFIRM THE OPERATION

    Confirm the operation again.

    Is the result normal?

    YES 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

    NO 

    GO TO STEP 1  .