Diagnostic Test
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK SYSTEM SETTING
- Check system setting.
Refer to WORK PROCEDURE .
- Check the operation.
Is the inspection result normal?
YES
Entry/Exit function is OK.
NO
GO TO STEP 2 .
- Check system setting.
- PERFORM SYSTEM INITIALIZATION
- Perform system initialization.
Refer to WORK PROCEDURE .
- Check the operation.
Is the inspection result normal?
YES
Entry/Exit function is OK.
NO
GO TO STEP 3 .
- Perform system initialization.
- CHECK FRONT DOOR SWITCH (DRIVER SIDE)
Check front door switch (driver side).
Refer to COMPONENT FUNCTION CHECK .
Is the inspection result normal?
YES
GO TO STEP 4 .
NO
Repair or replace the malfunction parts.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES
Check intermittent incident. Refer to INTERMITTENT INCIDENT .
NO
GO TO STEP 1 .