LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> QX70 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 139 (Automatic Drive Positioner (Symptom Diagnosis & Removal And Installation) (Hybrid)) >> Basic Inspection >> System Setting >> Description >> Setting Change

Setting Change

WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

: Applicable

Item Content CONSULT Set switch Factory setting
Amount of seat sliding for
entry/exit assist		 The amount of seat sliding for entry/exit assist can be selected from 3 items.
[40mm/80mm/150mm]		 x - 40mm
Entry/exit assist
(seat)		 Entry/exit assist (seat) can be selected:
ON (operated) - OFF (not operated)		 x x ON
Entry/exit assist
(steering column)		 Entry/exit assist (steering column) can be selected:
ON (operated) - OFF (not operated)		 x ON
scientia non olet · About LEMON Manuals