Additional Service When Removing Battery Negative Terminal: Description
WARNING: This page is about a different car, the 2016 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
Each function is reset to the following condition when the battery terminal is disconnected. For details, refer to WORK PROCEDURE .
| Function | Condition | Procedure |
|---|---|---|
| Entry/exit assist | ON | Perform initialization |
| Set slide amount*1 |
*1 : Default value is 40mm.
NOTE:
Notice that disconnecting the battery when detected DTC are present will erase the DTC memory.