DTC Index
| Display contents of CONSULT | Diagnostic item is detected when... | Refer to |
|---|---|---|
| CAN COMM CIRCUIT [U1000] |
When combination meter is not transmitting or receiving CAN communication signal for 2 seconds or more. | DIAGNOSIS PROCEDURE |
| CONTROL UNIT (CAN) [U1010] |
When detecting error during the initial diagnosis of the CAN controller of combination meter. | DIAGNOSIS PROCEDURE |
| VEHICLE SPEED CIRC [B2205] |
The abnormal vehicle speed signal is input from the ABS actuator and electric unit (control unit) for 2 seconds or more. | DIAGNOSIS PROCEDURE |
| TACHO METER [B2267] |
If ECM continuously transmits abnormal engine speed signals for 2 seconds or more. | DIAGNOSIS PROCEDURE |
| WATER TEMP METER [B2268] |
If ECM continuously transmits abnormal engine coolant temperature signals for 60 seconds or more. | DIAGNOSIS PROCEDURE |