LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> QX60 Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Driver Assistance System (Basic Inspection, Symptom Diagnosis & Removal And Installation) (Blind Spot Warning & Blind Spot Intervention) (Except Hybrid) >> Symptom Diagnosis >> Blind Spot Warning & Blind Spot Intervention System Symptoms >> Symptom Table

Symptom Table

CAUTION:

Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected.

NOTE:

Refer to the following the operation condition of the Blind Spot Warning/Blind Spot Intervention system.

Symptom Possible cause Inspection item/Reference
Indicator/warning lamps do not illuminate when ignition switch OFF → ON. Blind Spot Warning/Blind Spot Intervention warning lamp (orange) does not illuminate
  • Blind Spot Warning/Blind Spot Intervention warning lamp signal (CAN)
    • Combination meter
    • ADAS control unit
  • Blind Spot Warning/Blind Spot Intervention warning lamp (combination meter)
Blind Spot Intervention ON indicator (Green) does not illuminate
  • Blind Spot Intervention ON indicator lamp signal (CAN)
    • Combination meter
    • ADAS control unit
  • Blind Spot Intervention ON indicator (combination meter)
Blind Spot Intervention ON indicator (Green) and Blind Spot Warning/Blind Spot Intervention warning lamp (orange) do not illuminate
  • Combination meter
  • ADAS control unit
All of indicator/warning lamps do not illuminate;
  • Blind Spot Warning/Blind Spot Intervention warning lamp
  • Blind Spot Intervention ON indicator
  • Warning systems ON indicator
  • Power supply and ground circuit of ADAS control unit
  • ADAS control unit
  • Combination meter
Power supply and ground circuit of ADAS control unit. Refer to DIAGNOSIS PROCEDURE
Warning systems ON indicator (on the warning systems switch) does not illuminate
  • Harness between ADAS control unit and warning systems switch
  • Warning systems switch
  • ADAS control unit
Warning systems ON indicator circuit. Refer to DIAGNOSIS PROCEDURE
Blind Spot Warning/Blind Spot Intervention indicator does not turn ON
  • Harness between side radar and Blind Spot Warning/Blind Spot Intervention indicator
  • Side radar LH/RH
  • Blind Spot Warning/Blind Spot Intervention indicator
Perform self - diagnosis of side radar. Refer to CONSULT FUNCTION (SIDE RADAR LEFT) or CONSULT FUNCTION (SIDE RADAR RIGHT) .
BSW system is not activated.
(Indicator/warning lamps illuminate when ignition switch OFF → ON.)
Warning systems ON indicator is not turned ON ==> OFF when operating warning systems switch
  • Harness between ADAS control unit and waning systems switch
  • Harness between warning systems switch and ground
  • ADAS control unit
  • Warning systems switch
  • Warning systems switch circuit.

    Refer to DIAGNOSIS PROCEDURE .

  • BSW system setting cannot be turned ON/OFF on the navigation screen.

    Refer to DESCRIPTION 

Buzzer is not sounding
  • Power supply and ground circuit of driver assistance buzzer control module
  • Harness between the driver assistance buzzer control module and warning buzzer
  • Warning buzzer
  • Driver assistance buzzer control module
Power supply and ground circuit of Driver assistance buzzer control module. Refer to DIAGNOSIS PROCEDURE
Warning buzzer circuit. Refer to DIAGNOSIS PROCEDURE
Blind Spot Intervention system is not activated.
(BSW system is functioning normally)
Blind Spot Intervention ON indicator is not turned ON ==> OFF when operating dynamic driver assistance switch.
  • Dynamic driver assistance switch
  • Combination meter
  • ADAS control unit
  • Dynamic driver assistance switch does not turn ON/OFF.

    Refer to DESCRIPTION 

  • Blind Spot Intervention system setting cannot be turned ON/OFF on the navigation screen.

    Refer to DESCRIPTION 

Warning is functioning but yawing is not functioning. -
Blind Spot Intervention functions are not timely. (BSW system is functioning normally.)
(Example)
  • Does not function when approaching a lane marker while Blind Spot Warning/Blind Spot Intervention indicator lamp is illuminated.
  • Functions when driving in the middle of lane.
  • Camera aiming adjustment
  • Lane camera unit
Camera aiming adjustment.