Diagnosis Procedure

Check steering switch circuit. Refer to DIAGNOSIS PROCEDURE .

Is the inspection results normal?

YES 

GO TO STEP 2  .

NO 

Repair or replace harness or connectors.

Check steering switch resistance. Refer to COMPONENT INSPECTION .

Is the inspection results normal?

YES 

GO TO STEP 3  .

NO 

Replace steering switch. Refer to REMOVAL AND INSTALLATION .

Check spiral cable for continuity. Refer to COMPONENT INSPECTION .

Is the inspection results normal?

YES 

Replace combination meter  . Refer to REMOVAL AND INSTALLATION .

NO 

Replace spiral cable. Refer to REMOVAL AND INSTALLATION .