Diagnosis Procedure
- CHECK PARKING BRAKE WARNING LAMP OPERATION
- Start engine.
- Check the operation of the brake warning lamp while operating the parking brake.
Condition Warning lamp status Parking brake applied ON Parking brake released OFF Is the inspection result normal?
YES
Replace combination meter. Refer to REMOVAL AND INSTALLATION .
NO
GO TO STEP 2.
- CHECK PARKING BRAKE SWITCH SIGNAL CIRCUIT
- Turn ignition switch OFF.
- Check the parking brake switch signal circuit. Refer to DIAGNOSIS PROCEDURE .
Is the inspection result normal?
YES
GO TO STEP 3.
NO
Repair or replace harness or connectors.
- CHECK PARKING BRAKE SWITCH UNIT
Perform a unit check for the parking brake switch. Refer to COMPONENT INSPECTION .
Is the inspection result normal?
YES
Replace combination meter. Refer to REMOVAL AND INSTALLATION .
NO
Replace parking brake switch. Refer to EXPLODED VIEW .