LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> QX60 Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel (Except Hybrid) >> Removal And Installation >> Center Console Assembly >> Removal And Installation >> Removal

Removal And Installation: Removal

CAUTION:

Be careful not to scratch center console finishers and other parts.

  1. Release center console side finisher (LH/RH) clip and pawls using a suitable tool and remove.
    G09425931Courtesy of NISSAN NORTH AMERICA, INC.

    SANKAKU-H : Clip

    MARU-H : Pawl

    ARROW : Front

  2. Remove front console mat from front console tray.
  3. Remove front console tray screw (A).
    G09425932Courtesy of NISSAN NORTH AMERICA, INC.
  4. Release front console tray clips using a suitable tool, disconnect the harness connector and remove.
  5. Remove shift selector handle. Refer to EXPLODED VIEW .
  6. Release shift selector finisher clips and pawls using a suitable tool, disconnect the harness connectors and remove.
  7. Release center console rear brace finisher (1) pawls using a suitable tool and remove.
    G09425933Courtesy of NISSAN NORTH AMERICA, INC.

    MARU-H : Pawl

    NOTE:

    Center console bin lid removed for clarity.

  8. Remove center console rear finisher screws (A).
    G08945928Courtesy of NISSAN NORTH AMERICA, INC.
  9. Release center console rear finisher clips using a suitable tool, disconnect the harness connectors and remove.
    G09425935Courtesy of NISSAN NORTH AMERICA, INC.

    SHIKAKU-H : Metal clip

  10. Remove center console assembly screws.
  11. Disconnect the harness connectors from the center console assembly and remove.
scientia non olet · About LEMON Manuals