LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> QX50 RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Front Suspension (AWD)) >> Removal And Installation >> Front Coil Spring And Shock Absorber >> Inspection >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different variant/trim than selected.
  1. Check wheel sensor harness for proper connection. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .
  2. Check wheel alignment. Refer to INSPECTION .
  3. Adjust neutral position of steering angle sensor. Refer to SPECIAL REPAIR REQUIREMENT .
scientia non olet · About LEMON Manuals