Diagnosis Procedure

Perform self-diagnosis of ECM with CONSULT.

Is any DTC detected?

YES 

GO TO STEP 2  .

NO 

GO TO STEP 4  .

Perform trouble diagnosis of ECM. Refer to DTC INDEX .

GO TO STEP 3  .

Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT.

Is the DTC "U0100" erased?

YES 

INSPECTION END

NO 

Replace ABS actuator and electric unit (control unit).

Remove ECM. Install a normal ECM.

GO TO STEP 5  .

Erase DTC memory of ABS actuator and electric unit (control unit) with self-diagnosis of CONSULT.

Is the DTC "U0100" erased?

YES 

Replace ECM.

NO 

Replace ABS actuator and electric unit (control unit).