Diagnosis Procedure

1. Turn ignition switch OFF.
2. Disconnect AV control unit connector and microphone connector.
3. Check continuity between AV control unit harness connector and microphone harness connector.

   AV control unit		Microphone		Continuity
   Connector	Terminals	Connector	Terminals
   M151	71	R17	2	Existed
   	72		4
   	87		1

4. Check continuity between AV control unit harness connector and ground.

   AV control unit		Ground	Continuity
   Connector	Terminals
   M151	72		Not existed
   	87

Is the inspection result normal?

YES 

GO TO STEP 2  .

NO 

Repair harness or connector.

1. Connect AV control unit connector.
2. Turn ignition switch ON.
3. Check voltage between AV control unit harness connector.

   (+)		(-)		Voltage (Approx.)
   AV control unit		AV control unit
   Connector	Terminal	Connector	Terminal
   M151	72	M151	71	5.0 V

Is the inspection result normal?

YES 

GO TO STEP 3  .

NO 

Replace AV control unit. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .

1. Connect microphone connector.
2. Check signal between AV control unit harness connector.

   (+)		(-)		Condition	Reference value
   AV control unit		AV control unit
   Connector	Terminal	Connector	Terminal
   M151	87	M151	71	Give a voice.	Courtesy of NISSAN NORTH AMERICA, INC.

Is the inspection result normal?

YES 

Replace AV control unit. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .

NO 

Replace microphone. Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .