Inspection Procedure

Are camera lens and windshield contaminated with foreign materials?

YES 

Clean camera lens and windshield.

NO 

GO TO STEP 2  .

Check lane camera unit installation condition (installation position, properly tightened, a bent bracket).

Is it properly installed?

YES 

GO TO STEP 3  .

NO 

Install lane camera unit properly, and perform camera aiming. Refer to DESCRIPTION .

Check vehicle height. Refer to WHEEL ARCH HEIGHT (2WD) or WHEEL ARCH HEIGHT (AWD).

Is vehicle height appropriate?

YES 

INSPECTION END

NO 

Repair vehicle to appropriate height.