LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> Q50 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 47 (Meter, Warning Lamp & Indicator -Diagnostic Trouble Codes (DTC U1000 -B2268) Q50_Hybrid) >> DTC/Circuit Diagnosis >> DTC U1010: Control Unit (Can) >> Diagnosis Procedure

Diagnosis Procedure

WARNING: This page is about a different variant/trim than selected.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. Turn ignition switch ON.
    2. Erase the self - diagnostic results.
    3. Perform DTC confirmation procedure. Refer to DTC DESCRIPTION .

    Is DTC detected?

    YES 

    Replace combination meter. Refer to REMOVAL AND INSTALLATION .

    NO 

    INSPECTION END