Diagnosis Procedure
WARNING: This page is about a different variant/trim than selected.
- CHECK FUEL LEVEL
Check that the fuel level is enough.
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Refuel.
- CHECK DTC WITH ECM
Perform self-diagnosis of ECM. Refer to CONSULT FUNCTION .
Is the inspection result normal?
YES
GO TO STEP 3 .
NO
Perform diagnosis procedure corresponding to DTC indicated. Refer to DTC INDEX .
- CHECK ENGINE CONTROL SYSTEM
According to the symptom table of ENGINE CONTROL SYSTEM, check the root cause. Refer to "HARD/NO START/RESTART" in SYMPTOM TABLE .
Is the inspection result normal?
YES
GO TO STEP 4 .
NO
Repair or replace error-detected parts.
- CHECK CLUTCH 1 DISC
Check clutch 1 disc thickness. Refer to INSPECTION .
Is the inspection result normal?
YES
Perform INTERMITTENT INCIDENT .
NO
Replace clutch and clutch cover. Refer to REMOVAL AND INSTALLATION .