LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> Q50 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 123 (Hybrid Motor System (Diagnostic Trouble Codes (DTCS) P2122-P31FF And Circuit Diagnosis) (Hybrid)) >> DTC / Circuit Diagnosis >> DTC P3112: Stop Lamp Switch >> Component Inspection (Brake Hold Relay)

Component Inspection (Brake Hold Relay)

WARNING: This page is about a different variant/trim than selected.

  1. CHECK ICC BRAKE HOLD RELAY

    Check the continuity between ICC brake hold relay terminals as per the following conditions.

    G05223983Courtesy of NISSAN NORTH AMERICA, INC.
    ICC brake hold relay Condition Continuity
    + -
    Terminal
    3 5 12 V direct current supply between terminals 1 and 2 Existed
    No current supply Not existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace ICC brake hold relay.

scientia non olet · About LEMON Manuals