LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> Q50 Base, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 123 (Hybrid Motor System (Diagnostic Trouble Codes (DTCS) P2122-P31FF And Circuit Diagnosis) (Hybrid)) >> DTC / Circuit Diagnosis >> Brake Switch >> Component Inspection (Stop Lamp Off Relay 1) >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

  1. CHECK STOP LAMP OFF RELAY 1

    1. Turn ignition switch OFF.
    2. Remove stop lamp OFF relay 1.
    3. Check the continuity between stop lamp OFF relay 1 terminals as per the following condition.
      Stop lamp OFF relay 1 Condition Continuity
      + -
      Terminal
      3 4 12 V direct current supply between terminals 1 and 2 Not existed
      No current supply Existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace stop lamp OFF relay 1.

scientia non olet · About LEMON Manuals