Adjustment Of Steering Angle Sensor Neutral Position: Description
WARNING: This page is about a different car, the 2017 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
Always adjust the neutral position of steering angle sensor before driving when the following operation is performed. Refer to WORK PROCEDURE
: Required : Not required
| Procedure | Adjust the neutral position of steering angle sensor |
|---|---|
| Removing/ installing ABS actuator and electric unit (control unit) | - |
| Replacing ABS actuator and electric unit (control unit) | - |
| Removing/installing steering angle sensor | * |
| Replacing steering angle sensor | * |
| Removing/installing steering components | * |
| Replacing steering components | * |
| Removing/installing suspension components | * |
| Replacing suspension components | * |
| Removing/installing tire | - |
| Replacing tire | - |
| Tire rotation | - |
| Adjusting wheel alignment. | * |