LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> Q50 Base, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Automatic Transmission (Symptom Diagnosis & Removal And Installation) (Except Hybrid)) >> Unit Disassembly And Assembly >> Under Drive Carrier, Front Brake Hub >> Disassembly

Under Drive Carrier, Front Brake Hub: Disassembly

WARNING: This page is about a different car, the 2018 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove snap ring SYMBOL from front brake hub using a flat-bladed screwdriver.
    GNSJPDIA1128Z-128Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:
    • Be careful not to scratch front brake hub and under drive carrier assembly.
    • Be careful not to damage snap ring.
  2. Remove under drive carrier assembly SYMBOL from front brake hub.
    GNSJPDIA1129Z-129Courtesy of NISSAN NORTH AMERICA, INC.
  3. Remove snap ring SYMBOL from front brake hub using a flat-bladed screwdriver.
    GNSJPDIA1130Z-130Courtesy of NISSAN NORTH AMERICA, INC.
    CAUTION:
    • Be careful not to scratch front brake hub.
    • Be careful not to damage snap ring.
scientia non olet · About LEMON Manuals