Direct Clutch: Assembly

WARNING: This page is about a different car, the 2018 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

Install direct clutch component part (drive plates, driven plates, retaining plate and dish plate) to direct clutch drum.

2.0L turbo gasoline engine models

Courtesy of NISSAN NORTH AMERICA, INC.

1	: Snap ring
2	: Retaining plate
3	: Drive plate (five pieces)
4	: Driven plate (five pieces)
5	: Dish plate

CAUTION: Check the order of plates.

VR30DDTT engine models

Courtesy of NISSAN NORTH AMERICA, INC.

1	: Snap ring
2	: Retaining plate
3	: Drive plate (six pieces)
4	: Driven plate (six pieces)
5	: Dish plate

CAUTION: Check the order of plates.

Install snap rings to direct clutch drum using a flat-bladed screwdriver.

Courtesy of NISSAN NORTH AMERICA, INC.
CAUTION:
- Be careful not to scratch direct clutch drum and direct clutch retaining plate.
- Be careful not to damage snap ring.