Removal and Installation: Installation
WARNING: This page is about a different car, the 2018 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.
Note the followings and install in the reverse order of removal.
CAUTION:
Never reuse copper washers.
- Refer to the following when installing fluid cooler hoses.
Fluid cooler hose
Installation side tube
Direction of paint mark
Hose insertion depth (L)
Fluid cooler hose A
Fluid cooler tube
Upward
Hose end reaches the paint mark
Fluid cooler hose B
Fluid cooler tube
Hose end reaches the paint mark
- Refer to the following when installing hose clamps.CAUTION: Hose clamp should not interfere with the bulge of tube.
Fluid cooler hose
Installation side tube
Hose clamp
Direction of tab
Clamping position (A)
Fluid cooler hose A
Fluid cooler tube
Upward
5 - 9 mm (0.20 - 0.35 in) from hose end
Fluid cooler hose B
Fluid cooler tube