Removal and Installation: Installation

WARNING: This page is about a different car, the 2018 Infiniti Q50. However, it is still accessible from the selected car via links, so may be relevant.

Note the following and install in the reverse order of removal.

CAUTION:

Apply multi-purpose grease on the pin surface (that slides after installing collar) of the tip of the control rod.

Courtesy of NISSAN NORTH AMERICA, INC.

When tightening manual lever mounting nut, set manual lever in "N" position and fix manual lever to prevent it from moving.

Courtesy of NISSAN NORTH AMERICA, INC.

	: D position
	: N position
	: R position
	: P position
	: Vehicle front