LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> Q50 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio, Visual & Navigation System (INFINITI INTOUCH) (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> Voice Guidance Signal Circuit >> With BOSE System >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK VOICE GUIDANCE SIGNAL INPUT

    1. Turn ignition switch ON.
    2. Check the signal between display control unit terminals as per the following condition.
      Display control unit Condition Continuity
      Connector Terminals
      (+) (-)
      Terminal
      M101 68 48 Sound output
      G04084885Courtesy of NISSAN NORTH AMERICA, INC.

       

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    GO TO STEP 3  .

  2. CHECK VOICE GUIDANCE SIGNAL OUTPUT

    Check the signal between BOSE amp. terminals as per the following condition.

    BOSE amp. Condition Continuity
    Connector Terminals
    (+) (-)
    Terminal
    M101 67 47 Sound output
    G04084885Courtesy of NISSAN NORTH AMERICA, INC.

     

    Is the inspection result normal?

    YES 

    Replace BOSE amp. Refer to REMOVAL AND INSTALLATION .

    NO 

    GO TO STEP 5  .

  3. CHECK VOICE GUIDANCE INPUT SIGNAL CIRCUIT FOR OPEN

    1. Turn ignition switch OFF.
    2. Disconnect display control unit harness connector and NAVI control unit harness connector.
    3. Check the continuity between display control unit harness connector and NAVI control unit harness connector.
      Display control unit NAVI control unit Continuity
      Connector Terminal Connector Terminal
      M101 68 M60 14 Existed
      48 28

    Is the inspection result normal?

    YES 

    GO TO STEP 4  .

    NO 

    Repair or replace malfunctioning parts.

  4. CHECK VOICE GUIDANCE INPUT SIGNAL FOR SHORT

    Check the continuity between display control unit harness connector and ground.

    Terminals Continuity
    (+) (-)
    Display control unit
    Connector Terminal
    M101 68 Ground Not existed
    48

    Is the inspection result normal?

    YES 

    Replace NAVI control unit. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace malfunctioning parts.

  5. CHECK VOICE GUIDANCE OUTPUT SIGNAL CIRCUIT FOR OPEN

    1. Turn ignition switch OFF.
    2. Disconnect BOSE amp. harness connector and display control unit harness connector.
    3. Check the continuity between BOSE amp. harness connector and display control unit harness connector.
      BOSE amp. Display control unit Continuity
      Connector Terminal Connector Terminal
      B55 64 M101 67 Existed
      44 47

    Is the inspection result normal?

    YES 

    GO TO STEP 6  .

    NO 

    Repair or replace malfunctioning parts.

  6. CHECK VOICE GUIDANCE OUTPUT SIGNAL FOR SHORT

    Check the continuity between BOSE amp. harness connector and ground.

    Terminals Continuity
    (+) (-)
    BOSE amp.
    Connector Terminal
    B55 64 Ground Not existed
    44

    Is the inspection result normal?

    YES 

    Replace display control unit. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace malfunctioning parts.

scientia non olet · About LEMON Manuals