Diagnostic Test
- CHECK TAIL LAMP OPERATION
Check that the tail lamp (RH) is turned ON.
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Check tail lamp circuit. Refer to COMPONENT FUNCTION CHECK .
- CHECK LICENSE PLATE LAMP OPERATION
With CONSULT
- Select "EXTERNAL LAMPS" in "Active Test" mode of "IPDM E/R" using CONSULT.
- With operating the test items, check that the license plate lamp is turned ON.
TAIL : License plate lamp ON Off : License plate lamp OFF
Without CONSULT
- Start IPDM E/R auto active test. Refer to DIAGNOSIS DESCRIPTION .
- Check that the license plate lamp is turned ON.
Is the inspection result normal?
YES
License plate lamp circuit is normal.
NO
Refer to DIAGNOSIS PROCEDURE .