LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> Q50 Base, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Exterior Lighting System (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> Hazard Switch >> Component Function Check >> Diagnostic Test

Diagnostic Test

  1. CHECK HAZARD SWITCH SIGNAL BY CONSULT

    G-20 With CONSULT

    1. Turn ignition switch ON.
    2. Select "FLASHER" of "BCM" using CONSULT.
    3. Select "HAZARD SW" in "Data Monitor" mode.
    4. With operating the hazard switch, check the monitor status.
      Monitor item Condition Monitor status
      HAZARD SW Hazard switch ON On
      OFF Off

    Is the inspection result normal?

    YES 

    Hazard switch circuit is normal.

    NO 

    Refer to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals