LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2016 >> Q50 Base, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 51 (Automatic Transmission (Diagnostic Trouble Codes (DTCS) P0750-P2807 And Circuit Diagnosis) (Hybrid)) >> DTC / Circuit Diagnosis >> Selector Lever Position Indicator >> Component Function Check >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

  1. CHECK SELECTOR LEVER POSITION INDICATOR (PART 1)

    1. Turn ignition switch ON.
    2. Check that each position indicator lamp of the selector lever position indicator turns on when shifting the selector lever from "P" to "M" position.

    Is the inspection result normal?

    YES 

    GO TO STEP 2. 

    NO 

    Go to DIAGNOSIS PROCEDURE .

  2. CHECK SELECTOR LEVER POSITION INDICATOR (PART 2)

    Check that the night illumination of the selector lever position indicator turns on when setting the lighting switch in 1st position.

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Go to DIAGNOSIS PROCEDURE .

scientia non olet · About LEMON Manuals