Clutch 1 Solenoid Valve

WARNING: This page is about a different variant/trim than selected.

The clutch 1 solenoid valve is installed to control valve assembly.

Courtesy of NISSAN NORTH AMERICA, INC.
Clutch 1 solenoid valve operates CSC (concentric slave cylinder) and engages or releases clutch 1.
The clutch 1 solenoid valve utilizes a linear solenoid valve [N/L (normal low) type].

Courtesy of NISSAN NORTH AMERICA, INC.
NOTE:
- The principle of the linear solenoid valve utilizes the fact that the force pressing on the valve spool installed inside the coil increases nearly in proportion to the current. This allows it to produce a fluid pressure that is proportional to this pressing force.
- The N/L (normal low) type does not produce hydraulic control when the coil is not energized.