Diagnostic Test

1. Select "DOOR LOCK" of "BCM" using CONSULT.
2. Select "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT" mode.
3. Check "DOOR LOCK-UNLOCK SET" setting in "WORK SUPPORT".

   Refer to CONSULT FUNCTION (BCM - DOOR LOCK) .

Is the inspection result normal?

YES 

GO TO STEP 2  .

NO 

Set "On" in "DOOR LOCK-UNLOCK SET".

• Replace BCM. Refer to REMOVAL AND INSTALLATION .
• Confirm the operation after replacement.

Is the result normal?

YES 

INSPECTION END

NO 

Check intermittent incident. Refer to INTERMITTENT INCIDENT .