Diagnosis Procedure

1. Select "DOOR LOCK" of "BCM" using CONSULT.
2. Select "AUTOMATIC LOCK/UNLOCK SELECT" in "WORK SUPPORT" mode.
3. Check "AUTOMATIC LOCK/UNLOCK SELECT" setting in "WORK SUPPORT".

   Refer to CONSULT FUNCTION (BCM - DOOR LOCK) .

Is the inspection result normal?

YES 

GO TO STEP 2  .

NO 

Set "Unlock Only", "Lock Only" or "Lock/Unlock" in "AUTOMATIC LOCK/UNLOCK SELECT".

1. Select "DOOR LOCK" of "BCM" using CONSULT.
2. Select "AUTOMATIC DOOR LOCK SELECT" in "WORK SUPPORT" mode.
3. Check "AUTOMATIC DOOR LOCK SELECT" setting in "WORK SUPPORT".

   Refer to CONSULT FUNCTION (BCM - DOOR LOCK) .

Is the inspection result normal?

YES 

GO TO STEP 3  .

NO 

Set "P RANGE" in "AUTOMATIC DOOR LOCK SELECT".

1. Select "DOOR LOCK" of "BCM" using CONSULT.
2. Select "AUTOMATIC DOOR UNLOCK SELECT" in "WORK SUPPORT" mode.
3. Check "AUTOMATIC DOOR UNLOCK SELECT" setting in "WORK SUPPORT".

   Refer to CONSULT FUNCTION (BCM - DOOR LOCK) .

Is the inspection result normal?

YES 

GO TO STEP 4  .

NO 

Set "MODE 2" or "MODE 4" in "AUTOMATIC DOOR UNLOCK SELECT".

• Replace BCM. Refer to REMOVAL AND INSTALLATION .
• Confirm the operation after replacement.

Is the result normal?

YES 

INSPECTION END

NO 

Check intermittent incident. Refer to INTERMITTENT INCIDENT .