Diagnostic Test

1. Select "INTELLIGENT KEY" of "BCM" using CONSULT.
2. Select "ANTI KEY LOCK IN FUNCTI" in "WORK SUPPORT" mode.
3. Check "ANTI KEY LOCK IN FUNCTI" setting in "WORK SUPPORT".

   Refer to CONSULT FUNCTION (BCM - INTELLIGENT KEY) .

Is the inspection result normal?

YES 

GO TO STEP 2  .

NO 

Set "On" in "ANTI KEY LOCK IN FUNCTI".

Check inside key antenna.

• Instrument center: Refer to DTC LOGIC .
• Console: Refer to DTC LOGIC .
• Luggage room: Refer to DTC LOGIC .

Is the inspection result normal?

YES 

GO TO STEP 3  .

NO 

Repair or replace the malfunctioning parts.

Check unlock sensor.

Refer to COMPONENTFUNCTIONCHECK .

Is the inspection result normal?

YES 

GO TO STEP 4  .

NO 

Repair or replace the malfunctioning parts.

• Replace BCM. Refer to REMOVAL AND INSTALLATION .
• Confirm the operation after replacement.

Is the result normal?

YES 

INSPECTION END

NO 

Check intermittent incident. Refer to INTERMITTENT INCIDENT .