Diagnostic Test

Check automatic back door control module power supply and ground circuit.

Refer to DIAGNOSIS PROCEDURE .

Is the inspection result normal?

YES 

GO TO STEP 2  .

NO 

Repair or replace the malfunctioning parts.

Check touch sensor LH.

Refer to COMPONENTFUNCTIONCHECK .

Is the inspection result normal?

YES 

GO TO STEP 3. 

NO 

Repair or replace the malfunctioning parts.

Check touch sensor RH.

Refer to COMPONENTFUNCTIONCHECK .

Is the inspection result normal?

YES 

GO TO STEP 4. 

NO 

Repair or replace the malfunctioning parts.

1. Replace automatic back door control module. Refer to REMOVAL AND INSTALLATION .
2. Confirm the operation after replacement.

Is the result normal?

YES 

INSPECTION END

NO 

Check intermittent incident. Refer to INTERMITTENT INCIDENT .