Diagnosis Procedure

Check that DTC is not detected with BCM

Is the inspection result normal?

YES 

GO TO STEP 2  .

NO 

Perform trouble diagnosis relevant to DTC indicated.

Check that DTC is not detected with combination meter

Is the inspection result normal?

YES 

GO TO STEP 3  .

NO 

Perform trouble diagnosis relevant to DTC indicated.

Check combination meter buzzer.

Refer to COMPONENTFUNCTIONCHECK .

Is the inspection result normal?

YES 

GO TO STEP 4  .

NO 

Repair or replace the malfunctioning parts.

Check information display.

Refer to COMPONENTFUNCTIONCHECK .

Is the inspection result normal?

YES 

GO TO STEP 5  .

NO 

Repair or replace the malfunctioning parts.

• Replace BCM. Refer to REMOVAL AND INSTALLATION .
• Confirm the operation after replacement.

Is the result normal?

YES 

INSPECTION END

NO 

Check intermittent incident. Refer to INTERMITTENT INCIDENT .