LEMON Manuals: Even more car manuals for everyone
Home >> Infiniti >> 2015 >> QX80 Base, AWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Door & Lock (Diagnostic Trouble Codes (DTCS), Symptom Tests And R & I) >> DTC/Circuit Diagnosis >> Unlock Sensor >> Component Inspection

Component Inspection

  1. CHECK UNLOCK SENSOR

    1. Turn ignition switch OFF.
    2. Disconnect front door lock assembly (driver side) connector.
    3. Check continuity between front door lock assembly (driver side) terminals.
    Front door lock assembly (driver side) Condition Continuity
    Terminal
    3 4 Driver side door Unlock Existed
    Lock Not existed

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Replace front door lock assembly (driver side).

scientia non olet · About LEMON Manuals